將MySQL從MyISAM轉換成InnoDB錯誤和解決辦法

原來自己用的是為了裝的, 所以在設置database usage(如下圖1)的時候按照discuz官方的建議,選的都是Non-Transactional Database Only(只支持MyISAM數據引擎的非事務數據庫),用MyISAM數據庫,還沒涉及到需要InnoDB,因此打算直接不加載INNODB引擎。

后來在做WordPress,一開始還不知道原來WordPress用的是InnoDB數據引擎,于是在原來的數據庫里面就建了一個數據庫,一開始也沒發覺問題,安裝,導入sql,都沒問題,當時也沒多想。直到這幾天因為又要裝多一個WordPress,用phpMyAdmin訪問數據庫多一點,問題來了。老是一訪問WordPress的數據庫,就彈出錯誤提示“

圖1 設置數據庫類型

糾結了挺久,也忘了是看到什么文章觸發了靈感,反正后來才知道原來是數據引擎不同惹的禍。于是就想到重新運行次設置向導,把數據庫類型改成支持InnoDB引擎的。馬上行動,在向導里設置數據庫類型(也就是圖1的database usage)那里,設置成第二項,還在后面的InnoDB Tablespace Settings里把InnoDB數據文件設置放在D:MySQL InnoDB Datafiles目錄里。但是在最后execute執行的時候,卻老是在Start Service那里出問題,如下圖2。

圖2 Start service出錯 想直接到services.msc里面啟動服務,也不行。錯誤提示“” 按照網上的某些做法,卸載了MySQL服務,也沒重啟就重新設置,問題如故;把服務卸載了,重啟后再重新設置,則是啟動服務成功,但是在后面的Applying Security Settings的時候有新的問題,如下圖3。圖2那里的錯誤提示則變成“ 圖3 順便提一下,在MySQL5里(其他版本的我不知道)每運行一次設置向導,只要按了execute執行,都會在MySQL5的安裝目錄下自動生成一個原來的MySQL的設置文件my.ini的備份bak文件。并且將以修改的時間命名。因此如果設置出了問題,可以從備份文件恢復。
后來還是在錯誤日志里找到思路。錯誤日志就是放在 MySQL5安裝目錄Data 目錄里的那個以你的計算機名命名的.err文件。 首先我找到以下一段: InnoDB: Error: log file .ib_logfile0 is of different size 0 52428800 bytes InnoDB: than specified in the .cnf file 0 10485760 bytes! 101001 9:47:42 [ERROR] Default storage engine (InnoDB) is not available 101001 9:47:42 [ERROR] Aborting
101001 9:47:42 [Note] D:MySQL5binmysqld-nt: Shutdown complete
于是就到“MySQL5安裝目錄Data ”目錄里把ib_logfile0日志文件刪掉,重啟MySQL服務,還是提示10067錯誤。再去查看err文件。 101001 18:39:29 InnoDB: Log file .ib_logfile0 did not exist: new to be created InnoDB: Setting log file .ib_logfile0 size to 109 MB InnoDB: Database physically writes the file full: wait… InnoDB: Progress in MB: 100 InnoDB: Error: log file .ib_logfile1 is of different size 0 52428800 bytes InnoDB: than specified in the .cnf file 0 114294784 bytes! 101001 18:39:30 [ERROR] Default storage engine (InnoDB) is not available 101001 18:39:30 [ERROR] Aborting
101001 18:39:30 [Note] D:MySQL5binmysqld-nt: Shutdown complete
可以看到,ib_logfile0的問題解決了,但是同樣的問題卻出在ib_logfile1上面了。于是依樣畫葫蘆,把ib_logfile1刪了,再重啟MySQL服務,卻發現沒用。難道是還要重啟系統。果真,把前面兩個ib_logfile刪了,重啟系統就搞定了。前面的可能是因為剛開機,所以也行。實際上是需要重啟系統的。這時的日志如下 101001 19:19:24 InnoDB: Log file .ib_logfile0 did not exist: new to be created InnoDB: Setting log file .ib_logfile0 size to 109 MB InnoDB: Database physically writes the file full: wait… InnoDB: Progress in MB: 100 101001 19:19:26 InnoDB: Log file .ib_logfile1 did not exist: new to be created InnoDB: Setting log file .ib_logfile1 size to 109 MB InnoDB: Database physically writes the file full: wait… InnoDB: Progress in MB: 100 InnoDB: Cannot initialize created log files because InnoDB: data files are corrupt, or new data files were InnoDB: created when the database was started previous InnoDB: time but the database was not shut down InnoDB: normally after that. 101001 19:19:27 [ERROR] Default storage engine (InnoDB) is not available 101001 19:19:27 [ERROR] Aborting
101001 19:19:27 [Note] D:MySQL5binmysqld-nt: Shutdown complete
好了,現在只剩下最后一個問題了Default storage engine (InnoDB) is not available。去services.msc里面啟動MySQL服務,還是出錯。但是日志卻是顯示 InnoDB: No valid checkpoint found. InnoDB: If this error appears when you are creating an InnoDB database, InnoDB: the problem may be that during an earlier attempt you managed InnoDB: to create the InnoDB data files, but log file creation failed. InnoDB: If that is the case, please refer to InnoDB: http://dev.mysql.com/doc/mysql/en/Error_creating_InnoDB.html 101001 20:45:09 [ERROR] Default storage engine (InnoDB) is not available 101001 20:45:09 [ERROR] Aborting
101001 20:45:09 [Note] D:MySQL5binmysqld-nt: Shutdown complete
于是去網上搜索了一下,發現提示No valid checkpoint found.的

? 版權聲明
THE END
喜歡就支持一下吧
點贊11 分享